菜单

Equipment performance description and characteristics:

HM-2C130 blow molding machine adopting advanced microcomputer control system, stable performance. In terms of temperature control, a ruby lamp tube is used for heating, with strong penetration force. The bottle embryo rotates and is heated, and the track rotates, heating is uniform, fast and reliable; The width and height of the lamp tube and reflector in the heating zone can be adjusted to suit the heating of different structures of bottle embryos, and there is an automatic temperature exhaust device to ensure the constant temperature of the drying channel. Simultaneously using high-pressure turbocharging and hyperbolic arm linkage locking, the locking force is strong. The air circuit design divides the action and blowing into three parts to meet the needs of different air pressures for bottle blowing and action; The safe, reliable and unique reading design makes the air path clear at a glance.

Characteristic：

1. Blowing 2L liter PET jar (2 cavities);

2. Blow a 2L liter jar with a mold with 2 cavities, which can produce 1200-1500 bottles per hour;

3. Advanced PLC control system, stable performance, time control can be accurate to 0.01 seconds;

4. Special gas storage device;

5.Easy to install and start;

6.High safety factor, with photoelectric detection (anti-pinch device)

7. The direction of the heating lamp can be adjusted according to different preforms;

8. Only one person is required to operate, no special training is required;

9. Infrared lamp is used for heating, strong penetration, preform rotation and heating, orbit rotation, uniform heating, fast and reliable;

10. The rejection rate of finished products is less than 0.3%.

11. Each action is driven by the cylinder, and the oil pump is not used, which has the advantages of no pollution and low noise;

12. Different heating lamps are equipped with independent temperature control devices to ensure the ideal heating effect of the preforms;

13. The width and height of the lamp and heating zone in the heating zone can be adjusted to suit the heating of preforms of different structures, and there is an automatic temperature discharge device to ensure the constant temperature of the drying tunnel;